Custom drapery in Ellensburg means made-to-measure panels: sewn to your window’s exact height and width, lined for high desert sun, and hung on hardware chosen to suit your trim. It’s for homeowners tired of ready-made panels that float three inches above the floor or fade by their second summer. Call (509) 219-9495 or Book a design consultation and we’ll measure, talk fabric, and put a written quote in your hands.
What “made to measure” actually changes
Off-the-shelf panels come in a handful of stock lengths. Your windows don’t. In a 1960s Kittitas Valley ranch you might have a picture window that’s 96 inches wide with a 78-inch header, and in a craftsman near the CWU campus you might have three tall double-hungs with deep wood casings and no two exactly alike.
Custom work solves the fit problems first. Panels break at the floor the way you want them to — a crisp hover, a light kiss, or a puddle. Fullness is calculated from the rod length rather than guessed at, so the pleats stack evenly instead of gapping in the middle.
Then it solves the light problems. You choose the face fabric, the lining, and whether you want an interlining between them. That’s the part that matters most here, and it’s the part ready-made panels almost never get right.
How Ellensburg light and weather drive your fabric choices
Central Washington gives you long, dry, bright summers and cold winters, with big swings between afternoon and night (Western Regional Climate Center). South and west windows here take a beating that a Seattle living room never sees.
Sun fade and why lining is not optional
Unlined silk or a loose linen on a west-facing window will pale along the leading edge within a couple of seasons. A good drapery lining does two jobs: it takes the UV hit instead of your face fabric, and it gives the panel the weight to hang straight. For hard-hit exposures I’ll steer you toward solution-dyed or high-performance fabrics, tighter weaves, and a blackout or dim-out lining rather than a standard cotton sateen.
Heat in July, drafts in January
Drapery earns its keep on both ends of the year. The U.S. Department of Energy notes that medium-colored draperies with white plastic backings can cut solar heat gain by about 33%, and that most conventional draperies, drawn in cold weather, can reduce heat loss by up to 10% (energy.gov). Hang panels close to the glass, wide enough to seal the sides, and the difference in a west-facing bedroom is something you feel by mid-afternoon.
Dust, pollen and hay season
Windows open in an agricultural valley means fine dust settles into fabric. I plan for that: fabrics that vacuum and spot-clean well, and dry-clean-only silks saved for rooms where you don’t throw the sash open in August.
Custom drapery in Ellensburg homes: styles that suit ranch and craftsman windows
Style isn’t only taste — it’s architecture. Two of the most common house types around town ask for different things.
Ranch homes: wide, low, and horizontal
Eight-foot ceilings and long picture windows or sliders want height added back. Mounting the rod near the ceiling line and running panels to the floor makes the window read taller. On a slider, a single stacking panel on the non-traffic side keeps the doorway clear. Ripplefold or a relaxed pinch pleat works well because the stack is tidy.
Craftsman homes: trim you don’t want to hide
If you’ve got original fir casings, cover as little of them as you can. Inside-mount shades with a stationary panel on each side lets the woodwork show. Flat Roman shades, café curtains in a kitchen, or a simple French pleat in a linen blend all sit comfortably with that vocabulary.
Rentals and short-term stays
Ellensburg has a lot of student rentals and vacation stays. Those rooms need drapery that looks finished and takes abuse: durable performance fabric, cordless operation, and hardware anchored into blocking or studs rather than drywall alone.
Not sure whether you want drapery, shades, or both? Our overview of window treatment ideas for curtains, blinds and drapes walks through the trade-offs room by room.
Hardware, pleats and the details that get noticed
Pleat style sets the personality. French (pinch) pleat is the traditional choice and stacks beautifully. Euro pleat, tacked at the top, reads a little cleaner and more current. Goblet pleat suits a formal dining room. Ripplefold has no pleats at all — it’s soft, continuous waves on a track, and it’s my default for long spans and motorized runs.
Hardware is where a lot of DIY jobs come undone. A 10-foot span of heavy interlined fabric needs a rod diameter and bracket spacing that can carry it, plus a center support. Decorative rods in iron, brushed brass or stained wood can pick up your cabinet hardware or lighting finish so the room hangs together.
If you have young children or grandchildren in the house, go cordless or motorized. The Consumer Product Safety Commission is direct about the strangulation risk that accessible cords present to small children (CPSC window covering safety). Motorized tracks also make sense on tall windows over a stair or above a kitchen sink where nobody wants to reach.
Layering drapery with blinds and shades
Most Ellensburg rooms want two layers. A functional layer next to the glass handles glare and privacy hour by hour — cellular shades for insulation, roller shades with a solar screen fabric for a view you want to keep, or woven woods for texture. Then drapery panels frame the window, absorb sound, and soften all the hard surfaces in a room.
That combination is also the budget-friendly path. You can put the working shade in every room and reserve full drapery for the spaces you live in and the spaces guests see. Color choices carry across both layers, which is why we usually settle the palette first — here’s how we build a color palette for a whole house.
Ready to get specific about your windows? Call (509) 219-9495 or Book a design consultation.
What it costs in Ellensburg
Drapery is quoted per window, not per house, because two windows of the same size can land in very different places. Rather than throw out a number that won’t match your rooms, here’s exactly what moves a quote up or down so you can see where your project will sit before we measure.
| Factor | How it affects the quote |
|---|---|
| Window width and height | Fullness is a multiple of rod length, so wide windows and tall ceilings both mean more yardage. |
| Fabric choice | Performance blends, linens, velvets and embroideries all price differently by the yard. |
| Pattern repeat | Large repeats have to be matched panel to panel, which adds waste yardage. |
| Lining and interlining | Blackout and interlined constructions cost more in material and labor than a single lining. |
| Pleat and header style | Hand-finished pleats take more workroom time than a simple rod pocket or ripplefold track. |
| Hardware | Decorative rods, finials, traverse rods and ceiling tracks vary widely; motorization adds cost. |
| Install complexity | High ceilings, stair landings, plaster walls or no blocking behind the drywall all add labor. |
| Number of windows | Doing a whole floor at once is more efficient for measuring, ordering and installation than one room at a time. |
You’ll get a written, itemized quote after the measure appointment, with fabric memos in hand so you can see the color in your own light before you commit. If the first number is higher than you had in mind, we adjust — a simpler lining, a different fabric, stationary panels instead of functional, or a phased plan room by room.
Ellensburg and the surrounding service area
We work throughout Ellensburg and Kittitas County, including Kittitas, Thorp, Cle Elum, Roslyn and Suncadia, and south into Yakima and the Yakima Valley. Homes up the Teanaway and out toward Vantage are all within reach.
If you’re outside Ellensburg proper, the process is the same: an in-home measure, fabric samples left with you, and a return trip to install. See the full list on our communities we serve page, or read more about interior design services in Ellensburg if drapery is one piece of a larger project.
Why homeowners in Ellensburg call D. Marie Interiors
Because drapery has a lot of places to go wrong, and most of them happen before anything is sewn. Here’s how we keep that from happening.
- Consultation. We walk the rooms, look at exposure and how the light moves through the day, and talk about how you actually use each space — where you need blackout, where you need glare control, where a panel just needs to look good.
- Fabric selection. You see real samples in your own room, at your own window, at the hour of day that matters. Photos on a screen lie about color.
- Measuring. Every window gets measured individually, with the mount type, rod placement, stack direction and floor clearance recorded.
- Quote and order. You approve an itemized quote before anything is cut. Fabric, lining, hardware and installation are all spelled out.
- Installation. Hardware goes into solid backing, panels are hung, then dressed and trained so the folds fall correctly from day one.
Drapery is also rarely the only decision on the table. Because we handle the full range of design services — furnishings, color, wallpaper, tile — the window treatments get chosen alongside everything else instead of bolted on at the end. Have a look at our recent projects to see how that plays out.
Call (509) 219-9495 or Book a design consultation to get your windows measured.
Drapery is usually one piece of a larger room. See our interior design services in Ellensburg, furniture and decor selection in Ellensburg and kitchen and bath design in Ellensburg. South of the canyon, we also offer custom drapery in Yakima County.
Frequently Asked Questions
What fabrics hold up best to Ellensburg’s sun?
Tighter weaves and solution-dyed or high-performance blends resist fading far better than loose natural fibers. The bigger factor is lining — a blackout or dim-out lining takes the UV hit so your face fabric doesn’t. On south and west exposures I’ll recommend both, and steer delicate silks toward north-facing rooms where they’ll last.
Do drapes really help with heat and cold here?
Yes, measurably. The Department of Energy reports medium-colored draperies with white plastic backings can reduce solar heat gain roughly 33%, and conventional draperies drawn in cold weather can cut heat loss up to 10%. The gains depend on installation: hang panels close to the glass and wide enough to seal the sides, and close them during peak sun.
Should my panels be functional or stationary?
Functional panels draw closed, so they need enough fabric to cover the whole window and a rod that carries the weight. Stationary panels just frame the window and let a shade behind them do the work — less fabric, less cost. Bedrooms and west-facing living rooms usually want functional; dining rooms and entries are fine stationary.
Can you work with the blinds I already have?
Often, yes. If your existing blinds or shades operate well and the color works, drapery panels layer over them nicely and cover the hardware at the top. We’ll look at mount depth to be sure the rod clears the headrail. If a shade is failing or the wrong opacity for the room, we’ll say so before you spend on drapery.
Do you serve Yakima, Cle Elum and Suncadia as well as Ellensburg?
We do. Our service area runs through Kittitas County — Ellensburg, Kittitas, Thorp, Cle Elum, Roslyn, Suncadia — and south into Yakima and the Yakima Valley. The process doesn’t change with distance: an in-home measure, samples left with you, then a return visit to install and dress the panels.
How do I get started?
Call the number on this page or use the contact form to book a consultation. Come with a rough idea of which rooms are bothering you most and how you’d like them to feel. We’ll handle exposure, fabric, lining and hardware, and you’ll get an itemized written quote before anything is ordered.