Custom drapery Yakima County homeowners order is built to the window’s finished size, in a fabric and lining chosen for high desert sun — not a stock curtain you hem and hope for the best. It’s for homeowners who want rooms that stay livable in August, hold heat in January, and finally look finished. Call (509) 219-9495 or Book a design consultation, and we’ll measure your windows and put together a quote.
Custom Drapery Yakima County Homes Need, Measured to Fit
Ready-made panels come in a handful of widths and three or four lengths. Your windows don’t. Most Yakima ranch homes have wide, short openings. Older craftsman houses have tall windows that have shifted a little over a century of settling. Newer builds have sliders and stacked windows that swallow a standard panel whole.
Made-to-measure solves the fit problem first. Panels are cut to your rod height and your floor, so the hem breaks exactly where you want it — a crisp float above the floor in a high-traffic room, a slight break in a bedroom. Widths are built to the fullness you choose, so the folds stay generous instead of stretched flat across the rod.
You also get to decide everything an off-the-shelf panel decides for you: the lining, the header style, the hardware, and the return depth that wraps the panel back to the wall and closes the light gap at the edge. Those details are what make drapery read as custom from across the room.
Why Central Washington Light Is Hard on Window Treatments
Our summers are long, dry and bright, and the sun sits on south and west exposures for hours at a stretch. That does two things to a room: it heats it, and it slowly bleaches whatever is hanging in the window.
The heat load isn’t small. The U.S. Department of Energy reports that heat gain and heat loss through windows account for 25% to 30% of residential heating and cooling energy use. Drapery is one of the least invasive levers you have on that number. DOE also notes that in summer, medium-colored draperies with white plastic backings can reduce heat gain by about 33%, and that conventional draperies closed on a cold night cut heat loss by up to 10%.
Fading is the other half of the problem. UV breaks down both dye and fiber, and a panel facing due west in the Yakima Valley shows it on the leading edge first. A good lining takes that hit so the face fabric doesn’t. Then there’s valley dust — wind, harvest season, open windows in spring — so how a fabric cleans matters as much as how it looks on the sample board.
Fabrics and Linings That Hold Up Here
Lining is the decision that matters most
A drapery panel is really three choices stacked: face fabric, lining, and sometimes interlining. Standard cotton sateen lining shields against UV and gives the panel body. A thermal or blackout lining adds a barrier that slows heat transfer in both directions — worth it on any west wall and in most bedrooms.
Interlining is a soft flannel layer sandwiched between the face fabric and the lining. It’s the reason high-end drapery hangs in deep, sculptural folds instead of hanging flat like a flag. It also insulates. In a drafty older home in Yakima, an interlined panel over a cold window is a comfort difference you can feel standing next to it.
Fabrics that keep their color
Linen and linen blends are beautiful and read right in both ranch and craftsman rooms, but they relax over time and fade faster on hard exposures — line them properly. Polyester blends and solution-dyed performance fabrics hold color far better in full sun and shed dust easily. Silk is lovely and needs protection; I only specify it where the exposure is gentle or the lining is doing serious work.
Color plays into it too. Deep saturated dyes show fading sooner than mid-tones and textural weaves. If you want a dark drapery on a south window, we’ll choose a fabric engineered for that job. And if the whole room’s palette is still up in the air, my guide to choosing an interior color palette is a sensible place to start before you commit to yardage.
Blackout versus room darkening
Blackout fabric stops light coming through the panel. It does not stop light coming around it — that takes mounting high and wide, building in proper returns, and sometimes layering a shade underneath. If you work nights or you’ve got a nursery on the east side of the house, say so at the consultation and we’ll design the whole light seal rather than just the panel.
Pleats, Hardware and How the Panel Hangs
Pleat styles
The header sets the mood of the whole treatment. A Euro or two-finger pleat is clean and modern and suits newer Yakima builds. A French three-finger pleat is the traditional choice and sits well against craftsman trim. An inverted box pleat is tailored and quiet. Grommet and rod-pocket panels are casual — fine in a bonus room, less convincing in a formal living room.
Rods, tracks and ripplefold
Decorative rods with rings are the default, and they should go up high, usually near the ceiling line, and extend wide enough that the stacked panels sit off the glass. That one move makes a room feel taller and lets more daylight in when the drapery is open.
For a long wall of windows or a slider, a ripplefold track is often the better answer. The panels glide easily, they stack tighter, and there’s no visible pleat hardware breaking up the line. For a bay or a corner, a bendable track keeps the fabric continuous instead of chopping the wall into segments.
Motorization
Motorized tracks earn their keep on tall great-room windows you can’t reach and on west exposures you’d like closed automatically before the afternoon heat arrives. Battery, plug-in and hardwired options all exist. Which one makes sense depends on whether we can get power to the header without opening up finished drywall.
Want a second opinion on your windows before you commit to anything? Call (509) 219-9495 or Book a design consultation.
Room by Room in a Yakima Home
Living rooms and great rooms
This is usually the west-facing problem child. I like a lined drapery mounted high and wide, paired with a shade that handles daytime glare so the panels can stay open and decorative. The drapery becomes the soft, tall element in a room otherwise full of hard surfaces.
Bedrooms
Interlined or blackout-lined panels, floor length, with enough return to close the side gap. If there’s a baseboard heater under the window — common in older Yakima and Ellensburg houses — we’ll set the hem to clear it safely or move to a sill-length treatment instead.
Dining rooms, offices and kitchens
Dining rooms can take some drama: a patterned fabric, a goblet or French pleat, floor length. Kitchens and offices usually want function first — a shade or blind for control, with a stationary drapery panel on each side to soften the frame. That combination keeps fabric away from cooking heat and still finishes the window properly.
Layering Drapery With Blinds and Shades
In this climate, layering is almost always the right call. Shades do the daytime work; drapery handles insulation, sound and the look of the room. DOE reports that insulated cellular shades can reduce heat loss through windows by up to 40% and solar heat gain by up to 80%, which makes them a strong partner underneath a drapery panel on a punishing exposure.
If you want to compare the categories side by side before deciding, read my breakdown of curtains, blinds and drapes and where each one belongs. Products carrying an AERC energy rating have been tested to a standardized method, which is a useful tiebreaker when two shades look identical on paper.
What It Costs in Yakima
A drapery quote is built from your windows, not from a catalog page, so I’d rather tell you which decisions move the total than throw out a number that won’t match your house. Here’s where the money actually goes.
- Window size and quantity. Fabric is sold by the yard and labor is priced by the width. One tall great-room window can use several times the yardage of a bedroom window.
- Fullness. Two-times fullness costs less than two-and-a-half. On a stationary decorative panel you can often go lighter; on a panel that actually closes, keep the fullness.
- Lining and interlining. Every added layer is more material and more labor. Interlining is the biggest single jump in construction cost — and the biggest jump in how the drapery hangs and insulates.
- Pattern repeat. A large repeat means extra yardage to match panel to panel. Two fabrics at the same per-yard price can land far apart once the repeat is figured in.
- Hardware. A simple rod and rings sits at one end of the range; a motorized ripplefold track spanning a wall of glass sits at the other.
- Installation complexity. Ceiling mounts, plaster walls, bay windows and two-story headers all take longer than a straightforward drywall install.
A pair of lined panels on a bedroom window is a modest project. A full living room of interlined, motorized drapery is a different order of magnitude. Most homeowners land in between by prioritizing the rooms with the worst sun and phasing the rest over a year or two. At the consultation you’ll get real numbers for your own house before anything is ordered.
From Measure to Install: How the Process Works
- Consultation. We walk the rooms, look at exposure and existing finishes, and talk about how you actually use each space — light, privacy, heat, noise.
- Selection. You see real fabric samples in your own light, at your own windows. High desert daylight shifts a color more than most people expect.
- Measuring. Every window gets measured individually, including out-of-square openings, return depth and floor variation across the width.
- Quote and approval. You get a written scope listing fabric, lining, header, hardware and install details, plus what the fabric and hardware manufacturers cover, before you commit.
- Fabrication. Panels are made to your specifications. Custom work runs in weeks, not days, so we schedule around that.
- Installation. Hardware goes up, panels are hung, and the folds are dressed and tied so they train into shape from the first day.
Where We Work in Yakima County and Nearby
Yakima is home base for this service, and I work throughout Yakima County. I also serve Ellensburg, Kittitas County, Cle Elum and the surrounding Central Washington communities. You can see the full list on the communities we serve page.
Drapery is rarely the only item on the list. If you’re also rethinking paint, furniture layout or finishes, my interior design services in Yakima cover the whole room, so the window treatment isn’t the one element that doesn’t quite match everything else.
Why Homeowners in Yakima Call D. Marie Interiors
Because drapery is easy to get wrong and expensive to redo. Renee Fyall designs the treatment as part of the room — fabric held against your flooring, your cabinetry, your existing furniture — rather than picking a panel in isolation and hoping it lands.
You get one point of contact from the first walk-through to the last hem. Windows are measured in person, the scope is written down before anything is ordered, and hardware and panels are installed rather than dropped at your door in a box. If a fabric goes on backorder or a measurement needs a second look, you hear it from me directly.
And because this is Central Washington work, the recommendations account for the conditions here: hard summer sun, cold clear winters, valley dust, and rooms that have to function all twelve months. You can see finished rooms on the projects page.
Ready for real numbers on your own windows? Call (509) 219-9495 or Book a design consultation.
Drapery is usually one layer of a larger plan. See interior design in Yakima County, window treatments and blinds in Yakima County and furniture and decor selection in Yakima County. Up the canyon, we also offer custom drapery in Ellensburg.
Frequently Asked Questions
How long does custom drapery take from order to install?
Plan on weeks rather than days. The timeline depends on fabric availability, the workroom’s schedule and how complex the hardware is — a motorized track takes longer to source than a rod and rings. You’ll get a realistic window at the quote stage, and I’ll tell you right away if a fabric is backordered.
Should drapery touch the floor in a Yakima home?
Usually a half-inch float above the floor, which looks crisp and stays cleaner in a dusty valley. A slight break of an inch or two reads softer and suits bedrooms and formal rooms. Puddling looks lovely in photos but collects dust and pet hair fast, so I rarely recommend it out here.
Will drapery really help with summer heat?
Yes, meaningfully. The Department of Energy attributes 25% to 30% of residential heating and cooling energy use to windows, and lined draperies closed during peak sun reduce heat gain considerably. Layering a cellular shade underneath does more still. On a west-facing living room in July, the difference in comfort is obvious by mid-afternoon.
Can you work with windows I already have blinds on?
Absolutely, and it’s often the smartest approach. Existing blinds or shades handle glare and privacy; the drapery adds insulation, softness and height. We just need to check the depth of your window frame and mounting hardware so the rod clears everything and the panels stack cleanly off the glass.
What fabrics fade least in high desert sun?
Solution-dyed performance fabrics and polyester blends hold color best in direct sun. Linen and silk are more vulnerable and need a protective lining on south and west exposures. Mid-tone colors and textured weaves disguise gradual fading better than deep saturated solids. The lining choice matters as much as the face fabric.
Do you serve areas outside Yakima County?
Yes. Along with Yakima County, I work in Ellensburg, Kittitas County, Cle Elum and nearby Central Washington communities. If you’re not sure whether your address is in range, call and ask — it’s a quick answer and saves us both time before we schedule a consultation and measure.