Kitchen and Bath Design in Yakima County

Kitchen and bath design Yakima County homeowners trust starts with how the room works, not with what it’s finished in. D. Marie Interiors plans the layout, cabinetry, plumbing and lighting locations, tile and finishes for Yakima homeowners who are remodeling, adding on, or finally fixing a kitchen that has fought them for fifteen years. Some clients want the whole room planned; others just want the selections settled so their contractor can build. To get started, call (509) 219-9495 or Book a design consultation.

What a designer actually does on a kitchen or bathroom project

What a designer actually does on a kitchen or bathroom project

Most people picture a designer picking a backsplash. That’s the last ten percent. The work that saves you money happens weeks earlier, when the sink location, the appliance sizes and the door swings are still on paper and free to move.

On a typical project, you get a plan that a contractor can price and build from, and a set of selections with model numbers attached so nothing arrives as a surprise.

  • Measured floor plans and elevations showing cabinetry, appliances and fixture locations.
  • Cabinet layout, including drawer and door configuration, interior storage and filler details.
  • Countertop, tile, plumbing fixture, hardware and lighting selections, specified by model.
  • A lighting and electrical plan so switches, outlets and can lights land where you actually use them.
  • Coordination with your contractor, cabinet shop and installers as the job runs.

If you’re earlier than that and just want a second opinion on where the island goes, kitchen layout help in Yakima is a smaller, faster engagement.

Where We Work: Kitchen and Bath Design Yakima County and Nearby Towns

The core service area runs from the Yakima Valley up through the Kittitas Valley. That covers Yakima and the surrounding Yakima County neighborhoods, plus Ellensburg, Kittitas County and Cle Elum on the north end.

Staying inside that radius matters more than it sounds. Kitchen and bath projects need a designer who can show up on site when the cabinet shop has a question about a wall that isn’t square, not one who’s three hours out. If you’re outside the valley, get in touch anyway and we’ll tell you honestly whether it’s a fit.

You can see the wider picture of what we handle regionally on the Yakima County interior design page.

Designing a kitchen for Yakima houses and Yakima light

Kitchen with a window over the sink letting in afternoon light
West light through the kitchen window is part of the design, not an afterthought.

Housing stock here is mostly ranch and craftsman, with plenty of mid-century builds that were laid out for a much smaller refrigerator and one wall oven. The bones are usually good. The traffic pattern is usually the problem: a doorway in the wrong place, a peninsula that blocks the only path to the back door, twenty-four inches of counter beside the range.

Clearances come before style

Plan on at least 42 inches of walkway in a one-cook kitchen, and closer to 48 inches where two people work back to back. Those are the minimums we design to. In a 1960s Yakima ranch, finding those inches usually means moving one wall or shrinking an island by six inches, and it’s often worth doing both.

West-facing windows and afternoon heat

Summer afternoons here are hot and the sun sits low over the west hills right when you’re cooking dinner. Clear glass does very little to stop that heat once it’s through the window, which is why the kitchen plan includes the window treatment plan. A solar shade over the sink window, or drapery that stacks off the glass, keeps the room usable and keeps glare off a polished countertop.

Storage that matches how valley families cook

This is an agricultural valley and a lot of kitchens here run hard in August and September. Canning equipment, big stock pots, produce that arrives by the box. Those needs change a cabinet layout: deeper drawers, a dedicated pantry run, a place to set a full flat of peaches that isn’t the dining table.

If you want examples of how finishes land in a finished room, the Yakima kitchen designer page walks through the design side in more detail.

Bathrooms that hold up to dry summers and cold winters

Bathrooms are small, so every decision is visible. They’re also the room where code and comfort intersect most often. Washington adopts the International Residential Code statewide through the State Building Code Council, and local building departments enforce it, which means a bathroom without an operable window needs mechanical exhaust ventilation. Sizing that fan properly and venting it outside, not into the attic, is part of the plan.

Central Washington’s dry air is kind to bathrooms in one way and hard on them in another. Mold pressure is lower than on the west side, but big temperature swings and dry winter air move materials around. Large format tile on an out-of-plane wall telegraphs every dip, natural stone wants sealing on a schedule, and grout color choice matters more when hard water leaves its mark.

Tile floors also get cold in January. In a primary bath, electric floor heat under tile is one of the few upgrades almost nobody regrets, and it’s easiest to add when the floor is already open. For a look at finishes that age well, see our notes on bathroom tile trends and the Yakima bathroom remodel page.

Ready to talk through your own room? Call (509) 219-9495 or Book a design consultation.

What it costs in Yakima

We don’t publish figures, because two kitchens the same size can land in completely different places depending on what moves. What we can do is tell you honestly which decisions drive the number, so you know where your budget is going before you commit.

  • Scope: replacing cabinets and counters in the existing footprint costs far less than relocating plumbing, gas or load-bearing walls.
  • Cabinetry: stock, semi-custom and full custom are three different worlds, and box construction, drawer glides and finish all move the total.
  • Countertops: material, slab count, edge profile and how much seaming your layout forces.
  • Tile: the tile itself is often the smaller line. Pattern complexity, niches, curbless showers and waterproofing drive the labor.
  • Electrical and plumbing: new circuits, added can lights and moving a drain all mean permits and trade time.
  • Lead times: a specialty fixture on a long backorder can stall a job, and stalled jobs cost money.

Design fees are separate from construction and depend on how much of the project you want handled. Our guide to what drives interior design cost in Ellensburg and Yakima explains how scope and service level change the engagement.

Why homeowners in Yakima call D. Marie Interiors

Renee Fyall runs D. Marie Interiors, and the work stays local on purpose. Yakima and the Kittitas Valley are close enough that site visits happen when they need to happen, and the same person who drew the plan is the one answering the contractor’s question about the filler beside the range.

How the process runs

It starts with a consultation. We walk the space, talk through how you actually use it, what’s failing, what you’ve already bought and what your timeline looks like. From there you get a scope and a proposal before any design work begins.

Then come measurements, plan options, and a review where we push and pull the layout until it’s right. Selections follow, specified so your contractor can order and price accurately. During construction we stay reachable, because that’s when the real questions show up.

The whole room, not just the cabinets

Kitchens and baths don’t stop at the doorway. Because we also handle window treatments, blinds and drapery, color consultation and furniture selection, the finishes in your new kitchen can be chosen against the paint, the flooring and the dining room that sits ten feet away. That’s how a remodel ends up looking like it belongs to the house instead of arriving from a showroom.

To get on the calendar, call (509) 219-9495 or Book a design consultation.

If the project reaches past the kitchen or bath, see furniture and decor selection in Yakima County, window treatments and blinds in Yakima County and custom drapery in Yakima County. We also handle kitchen and bath design in Ellensburg.

Frequently Asked Questions

Do you serve all of Yakima County?

Yes. We work throughout Yakima and the surrounding Yakima County area, plus Ellensburg, Kittitas County and Cle Elum to the north. Staying inside the Yakima and Kittitas valleys means we can get to your site during construction, which matters on kitchen and bath projects where field decisions come up weekly.

Do I need a designer if I already have a contractor?

A good contractor builds what’s in front of them well. A designer decides what should be in front of them. Most of our clients have a builder lined up and bring us in for layout, cabinetry planning and selections so the bid is accurate and the ordering is right. We coordinate with your contractor throughout the job.

How long does design take before construction starts?

It depends on scope and how quickly decisions get made, but plan on several weeks between the first consultation and a finished set of drawings and selections. Cabinetry and specialty fixtures carry their own lead times on top of that, so the earlier the design is locked, the smoother the build schedule runs.

Do I need a permit to move plumbing in a Yakima bathroom?

Usually yes. Washington enforces the state building code through local jurisdictions, and relocating drains, running new circuits or altering structure typically requires permits and inspections. Your contractor normally pulls them. We plan the room so those changes are intentional and minimal rather than discovered halfway through demolition.

Can you help with finishes only, without a full remodel?

Absolutely. Plenty of Yakima homeowners keep their layout and just need tile, countertop, cabinet color, hardware, lighting and paint pulled together so the room reads as one thought. That’s a smaller engagement and a common starting point. We’ll tell you up front if your layout is fighting you badly enough to warrant more.

What should I have ready for the first consultation?

Rough dimensions, photos of the space, any inspiration images you’ve saved, a sense of your timeline, and a budget range you’re comfortable working within. Knowing what you dislike about the current room is just as useful as knowing what you want. Nothing needs to be decided before we talk.